Original
By certification 
OptiStar CG13
Electrical data
| Nominal input voltage | 100-240 VAC |
Frequency |
50-60 Hz |
Connected load |
40 VA |
Nominal output voltage (to the gun) |
12 V |
Nominal output current (to the gun) |
1.2 A |
Connection and output for vibrator (on Aux output) |
110/230 VAC |
Connection for rinsing function (valve) |
24 VDC |
Temperature range |
0°C - +40°C (+32°F - +104°F) |
Max. surface temperature |
85 °C (+185 °F) |
Pneumatic data
Compressed air connection |
8mm |
Min. input pressure (while unit in operation) |
5.5 bar / 80 psi |
Max. water vapor content of the compressed air |
1.3 g/m³ |
Max. oil vapor content of the compressed air |
0.1 mg/m³ |
CG13 Gun control unit
1 OptiStar CG13 Gun control unit - complete 1009 971
2 Cover 1008 301
CG13 - Front plate and power pack
Front plate - complete (pos. 1-12) 1009 860
Front plate with foil keyboard (pos. 5-8) 1009 859
1 OptiStar Mainboard V2.0 - complete 1009 844
2 Spacer sleeve - Ø 3.1/6x15 mm
3 PCB Powerboard V2.0 1009 865
4 Spacer sleeve - Ø 3.2/6x7 mm
5 Front frame - complete (incl. pos. 5.1) 1007 048
5.1 Special screw 1007 019
6 Special screw - M4x20/7 mm 1003 000
7 Front plate gasket 1007 042
9 Spacer sleeve - Ø 3.6/7x5 mm
10 Display 1007 044
11 Washer - Ø 3.2/7x0.5 mm
12 Locknut - M3
13 Power pack - 24 VDC 1009 849
CG13 - inside rear wall
1 Rear panel gasket 1007 033
2 CAN-Bus Modul - komplett (nur CG08-C) 1009 068
3 Elbow plug-in connection - Ø 8-Ø 8 mm 230 995
4 Solenoid valve - Ø 8-Ø 8 mm, NW 3.4, 24 VDC 1003 914
5 Motor throttle - complete 1000 064
6 Plastic tube - Ø 8/6 mm 103 152*
7 Fluidizing pad - 1/8"a 237 264
8 Cap screw - M4x16 mm 216 801
CG13 - Connecting material
1 Quick release connection - NW5, Ø 6 mm 200 840
1.1 Hose - Ø 6/4 mm 100 854*
2 Nut with kink protection - M12x1 mm, Ø 8 mm 201 316
2.1 Supplementary air hose - Ø 8/6 mm (black) 103 756*
2.2 Quick release coupling for supplementary air hose - NW5-Ø 8 mm 261 637
3 Nut with kink protection - M12x1 mm, Ø 8 mm 201 316
3.1 Conveying air hose - Ø 8/6 mm (red) 103 500*
3.2 Quick release coupling for conveying air hose - NW5-Ø 8 mm 261 645
4 Hose - Ø 8/6 mm 103 756*
5 Quick release connection - NW 5, Ø 6 mm 200 840
5.1 Hose - Ø 6/4 mm 100 854*
6 PowerClean module cable - 1 m (option) 1009 879
PowerClean module cable - 15 m (option) 1009 880
7 Power cable (country-specific)
8 Vibrator cable (constituent part of vibrator)
Find excellent quality parts of control unit cg13 from one of the largest manufacturers and suppliers - GALIN, which has been dedicated to this field for years. Leveraging on advanced equipment and superior techniques, we can offer you parts of control unit cg13 with high accuracy, high efficiency, reliable performance and long lifespan. Welcome to buy or wholesale our delicate products.
