Original
By certification 
Built on the market-leading Cisco hardware and Cisco IOS Software, the Cisco Catalyst Blade Switch is engineered with unique technologies specifically designed to meet the rigors of blade server-based application infrastructure. Specifically, the switch is designed to deliver scaleable, high-performance, highly resilient connectivity while supporting ongoing IT initiatives to reduce server infrastructure complexity and total cost of ownership (TCO).
| WS-CBS3012-IBM-I | Catalyst Swt Mod 3110G for IBM BladeCenter, IPB |
| WS-CBS3110G-S-I | Catalyst Swt Mod 3110X for IBM BladeCenter, IPB |
| WS-CBS3110X-S-I | Catalyst Switch Module 3012 for IBM BladeCenter |
| Part Number | Description | ||
| Switches | |||
| WS-CBS3130G-S | Cisco Catalyst Blade Switch 3130G for Dell M1000e with IP Base | ||
| WS-CBS3130X-S | Cisco Catalyst Blade Switch 3130X for Dell M1000e with IP Base | ||
| WS-CBS3032-DEL | Cisco Catalyst Blade Switch 3032 for Dell M1000e | ||
| WS-CBS3120G-S | Cisco Catalyst Blade Switch 3120G for HP w/IP Base | ||
| WS-CBS3120X-S | Cisco Catalyst Blade Switch 3120X for HP w/IP Base | ||
| WS-CBS3020-HPQ | Cisco Catalyst Blade Switch 3020 for HP | ||
| N4K-4001I-XPX | Cisco Nexus 4001I Switch Module for IBM Blade Center | ||
| WS-CBS3110G-S-I | Cisco Catalyst Switch Module 3110G for IBM BladeCenter w/IP Base | ||
| WS-CBS3110X-S-I | Cisco Catalyst Switch Module 3110X for IBM BladeCenter w/IP Base | ||
| WS-CBS3012-IBM-I | Cisco Catalyst Switch Module 3012 for IBM | ||
| Upgrade Licenses | |||
| 3130-IPS-LIC | Software Upgrade License for Cisco Catalyst Blade Switch 3130 to IP Services | ||
| 3120-IPS-LIC | Software Upgrade License for Cisco Catalyst Blade Switch 3120 to IP Services | ||
| 3110-IPS-LIC-I | Software Upgrade License for Cisco Catalyst Switch Module 3110 to IP Services | ||
| SFP Modules | |||
| GLC-LH-SM= | Gigabit Ethernet SFP, LC connector, long-wavelength/long-haul transceiver (single mode) | ||
| GLC-T= | Gigabit Ethernet SFP, RJ45 based Copper | ||
| GLC-SX-MM= | Gigabit Ethernet SFP, LC connector, short-wavelength transceiver (multimode) | ||
| Cisco TwinGig Converter Module | |||
| CVR-X2SFP | TwinGig Converter Module | ||
| X2 Modules | |||
| X2-10GB-CX4= | 10GBASE-CX4 X2 Module | ||
| X2-10GB-LX4= | 10GBASE-LX4 X2 Module | ||
| X2-10GB-LR= | 10GBASE-LR X2 Module | ||
| X2-10GB-SR= | 10GBASE-SR X2 Module | ||
| X2-10GB-LRM= | 10GBASE-LRM X2 Module | ||
| Cisco Nexus 4001I 10G Transceiver Support Matrix | |||
| SFP-10G-SR | 10GBASE-SR SFP+ module (multimode fiber [MMF]) | ||
| SFP-10G-LR | 10GBASE-LR SFP+ module (single-mode fiber [SMF]) | ||
| SFP-H10GB-CU1M | 10GBASE-CU SFP+ cable 1m (Twinax cable) | ||
| SFP-H10GB-CU3M | 10GBASE-CU SFP+ cable 3m (Twinax cable) | ||
| SFP-H10GB-CU5M | 10GBASE-CU SFP+ cable 5m (Twinax cable) | ||
| Dimensions (L×W×H) | 9.8×9.1×1.1 inches (24.8 cm×2.9 cm×23.1 cm) | ||
| Weight | Approximately 4.0 lb ( 1.8 kg) | ||
| Environmental ranges | • Operating temperature: 0 to 40°C | ||
| • Storage temperature: -25 to 70°C | |||
| • Operating relative humidity: 10 to 85% noncondensing | |||
| • Storage relative humidity: 5 to 95% noncondensing | |||
| Predicted mean time between failure (MTBF) | Approximately 390,000 hours | ||
| Performance | • Up to 128-Gbps switching fabric • Forwarding rate based on 64-byte packets; up to 59.2 million packets per second (mpps) • 256 MB double-data-rate (DDR) synchronous dynamic RAM (SDRAM) and 64 MB Flash memory • Configurable maximum transmission units (MTUs) of up to 9018 bytes (jumbo frames) |
||
